Port Chester, NY · Commercial Kitchen Specialists
Traulsen Repair in Port Chester
Traulsen Specialist Service
Traulsen builds premium, heavy-gauge reach-in refrigeration, roll-in cabinets and blast chillers for high-volume kitchens, hotels and institutions. Robust hot-gas defrost, Intelligent Control diagnostics and stainless construction built to run hard.
- Rating
- 4.9★ (963 reviews)
- Response
- Same-day + 24/7
- Warranty
- 90-Day Parts & Labor Warranty
- Focus
- Refrigeration · Cooking · Ice
Serving Port Chester
Traulsen Specialist Service
The short answer
Traulsen Repair in Port Chester typically runs $250–$900 — the $95 diagnostic is credited toward the repair. Most jobs finish same-day in one visit with genuine OEM parts, backed by a 90-Day Parts & Labor Warranty. Call (914) 537-0917.
Traulsen is the refrigeration high-volume kitchens reach for when they need cabinets that survive hotels, banquet operations, hospitals and busy restaurants running around the clock. The heavy-gauge stainless construction, hot-gas defrost and Intelligent Control diagnostics make Traulsen dependable — but also more sophisticated to service than a basic reach-in, which is why an experienced independent specialist matters. We troubleshoot the microprocessor controls and probes, read and clear alarm codes, diagnose defrost-termination faults that ice up an evaporator, and handle the sealed-system work on both self-contained and remote condensing setups. On blast chillers we verify that a cycle actually pulls product through the danger zone to target in the required time — a HACCP requirement, not a nicety. Every visit ends with confirmed holding temperatures and, where you need it, documentation for your food-safety log.
In a banquet, hotel or institutional kitchen, a down Traulsen roll-in or a blast chiller that won't hit its cycle target isn't just inconvenient — it stalls prep and puts cooked product at HACCP risk. These operations run continuously, so we treat Traulsen failures as priority same-day or emergency calls, carry the diagnostics to talk to the Intelligent Control boards, and document recovery temperatures for your food-safety records. We also catch the door-heater, gasket and defrost issues that quietly ice a coil and cause the next warm-cabinet emergency.
Why Choose Us
- Heavy-duty Traulsen reach-in, roll-in and blast-chiller experience
- Intelligent Control microprocessor and probe diagnostics
- Sealed-system service on self-contained and remote condensing units
- HACCP-friendly holding-temperature verification and documentation
- Same-day and 24/7 emergency response for high-volume kitchens
- 90-day parts & labor warranty on every repair
Maintenance Tips
- Clean condensers on a strict schedule — high-volume kitchens foul them fast
- Verify hot-gas defrost terminates cleanly; standing frost is an early warning
- Check door heaters and gaskets on freezers to prevent frost and sweating
- Test blast-chiller core probes periodically for accuracy
- Keep the Intelligent Control alarm log reviewed rather than blindly cleared
- Don't overload blast chillers beyond rated pan capacity or cycles will fail
Quick facts
| Service | Traulsen Repair |
|---|---|
| Turnaround | Same-day in most cases |
| Diagnostic | $95 — credited to the repair |
| Warranty | 90-Day Parts & Labor Warranty |
| Most common fault | Diagnosed on site |
| Serving | Port Chester, Rye, Harrison, Mamaroneck & Westchester County |
What repairs cost
Straight pricing, no surprises.
These are typical all-in market ranges for parts and labor on commercial kitchen equipment across Port Chester and Westchester County. Your exact price is quoted on site after diagnosis — the $95 service call is credited toward the repair.
| Repair | Typical range |
|---|---|
| Diagnostic / service call | $95–$165 |
| Reach-in / prep refrigeration repair | $250–$900 |
| Control board / electronics repair | $300–$1,000 |
| Door gasket / seal replacement | $150–$500 |
Ranges are estimates for reference, not a quote. Genuine OEM parts · 90-Day Parts & Labor Warranty.
How a visit goes
One specialist. One visit. Done right.
- 01
Call & book
Reach a real person at (914) 537-0917 — most Port Chester jobs get a same-day or next-morning slot.
- 02
Diagnose the fault
We test the actual failing part and circuit — not guess-and-swap — so the repair is right the first time.
- 03
Fix with parts on the truck
Common commercial refrigeration, cooking, warewash and ice parts ride with us, so most repairs finish in a single visit.
- 04
Warrantied & clean
Every repair is backed by a 90-Day Parts & Labor Warranty, and we leave the kitchen spotless.
Answers
Frequently asked questions
My Traulsen is showing an alarm code — what should I do first?
Note the exact code and the cabinet temperature, then call us with it. Traulsen's Intelligent Control logs probe, defrost and high-temperature alarms that point straight at the fault. Don't just clear it repeatedly — the log is diagnostic. We interpret the code, confirm it against actual readings, and repair the underlying probe, fan, defrost or sealed-system issue.
My blast chiller isn't pulling product down fast enough. Is that a HACCP problem?
Yes — a blast chiller exists to move cooked food through the temperature danger zone within a set time, and a slow cycle is a food-safety failure, not just a slow one. Causes include a fouled condenser, low charge, a weak evaporator fan, a bad core probe, or overloading. We diagnose the cycle, verify probe accuracy, and restore the unit to spec so your logs hold up.
Why does my Traulsen keep icing up inside?
Interior icing usually means the hot-gas defrost isn't terminating properly, a door heater or gasket has failed and is letting humid kitchen air in, or a drain is blocked. We test the defrost cycle and termination, check door heaters and seals, and clear the condensate path so the coil stays clear and the cabinet holds temperature.
Do you work on roll-in and roll-thru Traulsen cabinets?
Yes — roll-in and roll-thru cabinets used in bakeries, banquet and institutional kitchens are a regular part of our work. We service the sealed system, defrost, controls and the door and rack hardware that takes a beating in high-throughput operations.
Can you document holding temperatures for our food-safety log?
We verify and can record recovery and holding temperatures after any refrigeration repair, which is useful for HACCP and health-department documentation. Keeping proof that a repaired unit returned to and held safe temperature protects you at your next inspection.
Verified reviews
Rated 4.9★ by Port Chester kitchens
963 verified reviews
“We roll racks straight from the ovens into a Traulsen roll-in, and it stopped holding. The alarm log pointed at a probe; he checked it against a real thermometer, fitted a new one plus a worn hinge, and logged the recovery for our records.”
“Our Traulsen blast chiller was taking nearly twice as long to pull cooked product down, and the log made that obvious. Weak evaporator fan and a drifting core probe. Both replaced, cycle timed twice, and the readings written down for our file.”
“Opened Saturday to a walk-in reading 52 and a Sunday brunch order already sitting in it. The condensing unit had lost its fan capacitor. He carried one on the van, and the box was under 38 again by the time prep started.”
“Walk-in freezer was icing at the doorway and running nonstop. Failed frame heater and a torn sweep. Both fixed, drain line cleared, and he walked my closing crew through what to watch for.”
Across Port Chester, Rye, Harrison, Mamaroneck, White Plains and the wider Westchester County, Port Chester Commercial Appliance Repair is the company restaurants, delis, bakeries, caterers and commercial kitchens call when a traulsen repair needs fixing fast. We diagnose the actual fault — not guess-and-swap — carry the common commercial parts on the truck for most Port Chester visits, and back every repair with a 90-Day Parts & Labor Warranty. In a commercial kitchen downtime is lost revenue and, when refrigeration or warewashing is involved, a health-code exposure — so we run same-day and 24/7 emergency dispatch and verify safe temperatures before we leave. Call (914) 537-0917 for same-day and emergency service.
4.9★ · Port Chester & Westchester County
Need Traulsen Repair in Port Chester?
Call (914) 537-0917 for same-day service in Port Chester.